Can electric cables be channelled into Recticel insulation boards?
No, as this would reduce the performance of the boards. Cables can penetrate the insulation with no detriment to the cable sheathing. Any cables penetrating or lying against insulation should be oversized to cater for increased operating temperature. If in doubt, consult a qualified electrician.
What is the difference between a U-value and an R-value?
U-values take into account all elements of a construction, including thermal bridges. They can only be worked out by calculation. The R-value, or thermal resistance, is a measure of the insulation board on its own, dividing the thickness (in metres) by the thermal conductivity (lambda value, W/m.K). The R-value can be used to compare how different thicknesses of products with different lambda values perform comparatively.
What is the minimum clear cavity when using Recticel Insulation cavity wall products?
As per the documentation for Eurowall® +, the clear cavity can be reduced to 10mm due to the innovative tongue & groove interlocking joint.
Eurowall® Cavity is certified for use in conjunction with a 25mm cavity. However, some warranty providers will not accept this and require a 50mm cavity, as do Scottish Building Standards. A wider cavity should be used in exposed locations.
If in doubt, seek advice from your Building Control Officer.
Where can I buy Recticel Insulation products?
Recticel Insulation's products are available via number of stores across the country.